ZyXEL NBG4115 Bedienungsanleitung Seite 112

Chapter 8 WAN
The following table describes the labels in this screen.
Table 39 Network > WAN > Internet Connection: Mobile 3G
LABEL
ISP Parameters for Internet Access
Connection Type
Internet Service
Provider
PIN Code
APN Code
Dial Number
User Name
Password
Nailed-up
Connection
Idle Timeout
DNS Servers
First DNS Server
Second DNS Server
WAN MAC Address
Factory default
Clone the
computer's MAC
address - IP
Address
Set WAN MAC
Address
112
DESCRIPTION
3G is .
To configure a Mobile 3G client, you must configure the User Name
and Password fields as well as PIN Code, APN Code, and Dial
Number.
Select your ISP from this list, if it is pre-configured.
Enter the 4-digit 3G account PIN code given to you by your ISP.
Enter the Access Point Name (APN) given to you by your ISP.
Enter the phone number that must be dialed in order to login to
your 3G account from the NBG4115.
Type the user name given to you by your ISP.
Type the password associated with the User Name above.
Select Nailed-Up Connection if you do not want the connection to
time out.
This value specifies the time in minutes that elapses before the
NBG4115 automatically disconnects from the PPTP server.
Select From ISP if your ISP dynamically assigns DNS server
information (and the NBG4115's WAN IP address). The field to the
right displays the (read-only) DNS server IP address that the ISP
assigns.
Select User-Defined if you have the IP address of a DNS server.
Enter the DNS server's IP address in the field to the right. If you
chose User-Defined, but leave the IP address set to 0.0.0.0, User-
Defined changes to None after you click Apply. If you set a second
choice to User-Defined, and enter the same IP address, the
second User-Defined changes to None after you click Apply.
Select None if you do not want to configure DNS servers. If you do
not configure a DNS server, you must know the IP address of a
computer in order to access it.
The MAC address section allows users to configure the WAN port's
MAC address by either using the NBG4115's MAC address, copying
the MAC address from a computer on your LAN or manually entering
a MAC address.
Select Factory default to use the factory assigned default MAC
Address.
Select Clone the computer's MAC address - IP Address and
enter the IP address of the computer on the LAN whose MAC you
are cloning. Once it is successfully configured, the address will be
copied to the rom file. It will not change unless you change the
setting or upload a different ROM file.
Select this option and enter the MAC address you want to use.
User's Guide