Advanced - ZyXEL NBG4115 Bedienungsanleitung

10.3 Advanced

This screen allows you to assign IP addresses on the LAN to specific individual
computers based on their MAC addresses. You can also use this screen to
configure the DNS server information that the NBG4115 sends to the DHCP
clients.
To change your NBG4115's static DHCP settings, click Network > DHCP Server
> Advanced. The following screen displays.
Figure 63 Network > DHCP Server > Advanced
The following table describes the labels in this screen.
Table 43 Network > DHCP Server > Advanced
LABEL
Static DHCP Table
#
MAC Address
IP Address
DNS Server
DNS Servers
Assigned by
DHCP Server
User's Guide
DESCRIPTION
This is the index number of the static IP table entry (row).
Type the MAC address (with colons) of a computer on your LAN.
Type the LAN IP address of a computer on your LAN.
The NBG4115 passes a DNS (Domain Name System) server IP
address (in the order you specify here) to the DHCP clients. The
NBG4115 only passes this information to the LAN DHCP clients when
you select the Enable DHCP Server check box. When you clear the
Enable DHCP Server check box, DHCP service is disabled and you
must have another DHCP sever on your LAN, or else the computers
must have their DNS server addresses manually configured.
Chapter 10 DHCP Server
121