Pppoe Connection - ZyXEL NBG4115 Bedienungsanleitung

4.5.2 PPPoE Connection

Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection.
PPPoE is an IETF (Internet Engineering Task Force) standard specifying how a host
personal computer interacts with a broadband modem (for example DSL, cable,
wireless, etc.) to achieve access to high-speed data networks.
For the service provider, PPPoE offers an access and authentication method that
works with existing access control systems (for instance, RADIUS).
One of the benefits of PPPoE is the ability to let end users access one of multiple
network services, a function known as dynamic service selection. This enables the
service provider to easily create and offer new IP services for specific users.
Operationally, PPPoE saves significant effort for both the subscriber and the ISP/
carrier, as it requires no specific configuration of the broadband modem at the
subscriber's site.
By implementing PPPoE directly on the NBG4115 (rather than individual
computers), the computers on the LAN do not need PPPoE software installed,
since the NBG4115 does that part of the task. Furthermore, with NAT, all of the
LAN's computers will have Internet access.
Figure 17 Wizard Step 3: PPPoE Connection
The following table describes the labels in this screen.
Table 12 Wizard Step 3: PPPoE Connection
LABEL
ISP Parameter for Internet Access
Connection
Type
Service Name
User Name
Password
Back
User's Guide
DESCRIPTION
Select the PPP over Ethernet option for a dial-up connection.
Type the name of your service provider.
Type the user name given to you by your ISP.
Type the password associated with the user name above.
Click Back to return to the previous screen.
Chapter 4 Connection Wizard
45