Wan Ip And Dns Server Address Assignment - ZyXEL NBG4115 Bedienungsanleitung

The ISP tells you the DNS server addresses, usually in the form of an information
1
sheet, when you sign up. If your ISP gives you DNS server addresses, enter them
in the DNS Server fields in the Wizard and/or WAN > Internet Connection
screen.
If the ISP did not give you DNS server information, leave the DNS Server fields
2
set to 0.0.0.0 in the Wizard screen and/or set to From ISP in the WAN >
Internet Connection screen for the ISP to dynamically assign the DNS server IP
addresses.

4.5.9 WAN IP and DNS Server Address Assignment

The following wizard screen allows you to assign a fixed WAN IP address and DNS
server addresses.
Figure 21 Wizard Step 3: WAN IP and DNS Server Addresses
The following table describes the labels in this screen
Table 17 Wizard Step 3: WAN IP and DNS Server Addresses
LABEL
WAN IP Address Assignment
My WAN IP Address
My WAN IP Subnet
Mask
Gateway IP Address
System DNS Server Address Assignment (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. The DNS server is extremely important because without it, you
must know the IP address of a computer before you can access it. The NBG4115 uses a
system DNS server (in the order you specify here) to resolve domain names for DDNS and
the time server.
User's Guide
DESCRIPTION
Enter your WAN IP address in this field. The WAN IP address
should be in the same subnet as your DSL/Cable modem or
router.
Enter the IP subnet mask in this field.
Enter the gateway IP address in this field.
Chapter 4 Connection Wizard
51