Static Route; Chapter 15 Static Route; Overview; What You Can Do In This Chapter - ZyXEL NBG4115 Bedienungsanleitung

C
H A P T E R

15.1 Overview

This chapter shows you how to configure static routes for your NBG4115.
The NBG4115 usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the NBG4115 send data to devices
not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the NBG4115's
LAN interface. The NBG4115 routes most traffic from A to the Internet through
the NBG4115's default gateway (R1). You create one static route to connect to
services offered by your ISP behind router R2. You create another static route to
communicate with a separate network behind a router R3 connected to the LAN.
Figure 77 Example of Static Routing Topology
A
R3

15.1.1 What You Can Do in this Chapter

• Use the IP Static Route screen
static route rules.
• Use the Static Route Setup screen
a static route rule.
User's Guide
WAN
LAN
(Section 15.2 on page
(Section 15.2.1 on page
15

Static Route

R1
R2
154) to view existing
155) to add or edit
153