Back To Factory Defaults; Restart - ZyXEL NBG4115 Bedienungsanleitung

Chapter 21 Tools
If the upload was not successful, the following screen will appear. Click Return to
go back to the Configuration screen.
Figure 108 Configuration Restore Error

21.3.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration
information and returns the NBG4115 to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory
defaults of your NBG4115. Refer to the chapter about introducing the Web
Configurator for more information on the RESET button.

21.4 Restart

System restart allows you to reboot the NBG4115 without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the NBG4115
reboot. This does not affect the NBG4115's configuration.
Figure 109 Maintenance > Tools > Restart
194
User's Guide