Summary: Wlan Station Status - ZyXEL NBG4115 Bedienungsanleitung

Chapter 3 The Web Configurator
The following table describes the labels in this screen.
Table 6 Summary: Packet Statistics
LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
System Up Time
Poll Interval(s)
Set Interval
Stop

3.5.4 Summary: WLAN Station Status

Click the WLAN Station Status (Details...) hyperlink in the Status screen. View
the wireless stations that are currently associated to the NBG4115 in the
Association List. Association means that a wireless client (for example, your
network or computer with a wireless network card) has connected successfully to
the AP (or wireless router) using the same SSID, channel and security settings.
Figure 8 Summary: Wireless Association List
36
DESCRIPTION
This is the NBG4115's port type.
For the LAN ports, this displays the port speed and duplex setting or
Down when the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if
you're using Ethernet encapsulation and Idle (line (ppp) idle), Dial
(starting to trigger a call) and Drop (dropping a call) if you're using
PPPoE or PPTP encapsulation. This field displays Down when the line
is disconnected.
For the WLAN, it displays the maximum transmission rate when the
WLAN is enabled and Down when the WLAN is disabled.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This displays the transmission speed in bytes per second on this port.
This displays the reception speed in bytes per second on this port.
This is the total time the NBG4115 has been on.
Enter the time interval for refreshing statistics in this field.
Click this button to apply the new poll interval you entered in the Poll
Interval(s) field.
Click Stop to stop refreshing statistics.
User's Guide