Restore Configuration - ZyXEL NBG4115 Bedienungsanleitung

21.3.2 Restore Configuration

Restore configuration allows you to upload a new or previously saved
configuration file from your computer to your NBG4115.
Table 66 Maintenance Restore Configuration
LABEL
File Path
Choose File
Upload
Note: Do not turn off the NBG4115 while configuration file upload is in progress
After you see a "configuration upload successful" screen, you must then wait one
minute before logging into the NBG4115 again.
Figure 106 Configuration Restore Successful
The NBG4115 automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 107 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default
NBG4115 IP address (192.168.1.1). See
how to set up your computer's IP address.
User's Guide
DESCRIPTION
Type in the location of the file you want to upload in this field or click
Browse... to find it.
Click Choose File to find the .bin file you want to upload. Remember that
you must decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process.
Appendix D on page 233
Chapter 21 Tools
for details on
193