ZyXEL NBG4115 Bedienungsanleitung Seite 161

Table 56 Management > Bandwidth MGMT > Advanced (continued)
LABEL
Service
Priority
Specific Port
Bandwidth
Allocation
#
Enable
LAN IP Range
Direction
Port Range
Policy
Rate
Modify
Apply
Reset
User's Guide
DESCRIPTION
This is the name of the service.
You can also enter the name (up to 10 keyboard characters) of a service
you want to add in the priority queue (for example, Messenger).
Select a priority from the drop down list box. Choose High or Low.
This displays the port/s assigned to the service.
You can also specify the port/s to services to which you want to allocate
bandwidth. Choose either Both, TCP or UDP in the drop-down menu
and enter the port or range of ports in the provided boxes.
Note: If you are entering a specific port and not a range of ports,
you can either leave the second port field blank or enter the
same port number again.
Use this table to allocate specific amounts of bandwidth to specific
protocols on an IP or IP range.
This is the number of an individual bandwidth management rule.
Select this check box to have the NBG4115 apply this bandwidth
management rule.
This displays the range of IP addresses for which the bandwidth
management rule applies.
These read-only labels represent uplink or downlink traffic.
To LAN applies bandwidth management to traffic from WAN to LAN/
WLAN (i.e., downlink).
To WAN applies bandwidth management to traffic from LAN/WLAN to
WAN (i.e., uplink).
Both applies bandwidth management to traffic that the NBG4115
forwards to both the LAN and the WAN.
This displays the range of ports for which the bandwidth management
rule applies.
This displays either Max (maximum) or Min (minimum) and refers to
the maximum or minimum bandwidth allowed for the rule in kilobits per
second in the field below.
This is the maximum or minimum bandwidth allowed (refer to the field
above) for the rule in bits per second.
Click the Edit icon to open the Rule Configuration screen. Modify an
existing rule or create a new rule in the Rule Configuration screen.
See Section 16.3.3 on page 162
Click the Remove icon to delete a rule.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
Chapter 16 Bandwidth Management
for more information.
161