Manual Operation; Offset Temperature - eQ-3 homematic IP HmIP-eTRV-CL Montage- Und Bedienungsanleitung

• Confirm with the menu button.
To confirm, the symbol flashes twice and the device changes back to
automatic mode.
6.2

Manual operation

In manual mode, the temperature is controlled according to the tem-
perature set using the plus and minus buttons (C + E). The temperature
remains activated until the next manual change. To activate the manual
mode, proceed as follows:
• Press and hold the menu button (D) for approx. 2 seconds to
open the configuration menu.
• Select "MANU" using the plus and minus buttons (C + E).
• Confirm with the menu button.
To confirm, the symbol flashes twice and the device changes back to
manual mode.
6.3

Offset temperature

As the temperature is measured on the radiator thermostat, the temper-
ature distribution can vary throughout a room. To adjust for this, a tem-
perature offset of ±3.5 °C can be set. If, for example, 18 °C is measured
instead of the 20 °C set, an offset of -2.0 °C must be set. An offset tem-
perature of 0.0 °C is set in the factory settings. To adjust the offset tem-
perature, please proceed as follows:
Press and hold the menu button (D) for approx. 2 seconds to
•
open the configuration menu.
Select "OFFSET" using the plus and minus buttons (C + E).
•
• Confirm with the menu button.
• Select the desired offset temperature using the plus and minus
buttons and confirm with the menu button.
To confirm, the temperature flashes twice and the device changes back
to the standard display.
Configuration menu
55