Herunterladen Inhalt Inhalt Diese Seite drucken

Switching Nominal/Actual Temperature (S-A); Comfort And Reduced Temperature ( ) - eQ-3 MAX! Bedienungsanleitung

Elektronischer funk-heizkörperthermostat
Vorschau ausblenden Andere Handbücher für MAX!:
Inhaltsverzeichnis

Werbung

(date and time will switch on the display) with the (+)
and (-) buttons.
• Confirm setting with the OK button.

16.3 Switching nominal/actual temperature (S-A)

In the factory settings, the display will show the nominal
temperature. In the configuration menu, you can change
the display setting from nominal to actual temperature.
• Open the configuration menu by pressing the menu button.
• Select the (S-A) menu item with the (+) and (-) buttons
and confirm with the OK button.
• Now set the format you want to show on the display („SEt"
for the nominal temperature and „ACt" for the actual tem-
perature) with the (+) and (-) buttons.
• Confirm setting with the OK button.
If the actual temperature is selected, the display will display
„SEt" for 5 seconds on change of the nominal temperature
(or on change of mode). Afterwards, the display automati-
cally changes back to actual temperature.
16.4 Comfort and reduced temperature (
The comfort ( ) and reduced ( ) temperature buttons
make switching between comfort and reduced temperature
simple and user friendly. The factory setting for the comfort
temperature is 21.0°C and the reduced temperature 17.0°C.
When using MAX! without Cube, the comfort and redu-
ced temperature can be changed via corresponding but-
tons as follows:
)
51

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis