Dismounting, Return And Disposal - WIKA CPG1000 Betriebsanleitung

10. Dismounting, return and disposal

10. Dismounting, return and disposal
GB
10.1 Dismounting
Only disconnect test- and calibration installations once the system has been depressu-
rised!
10.2 Return
When returning the precision digital pressure gauge, use the original packaging or a
suitable transport package.
To avoid damage:
1. Wrap the CPG1000 in an antistatic plastic film.
2. Place the CPG1000, along with the shock-absorbent material, in the packaging. Place
shock-absorbent material evenly on all sides of the shipping box.
3. If possible, place a bag, containing a desiccant, inside the packaging.
4. Label the shipment as transport of a highly sensitive measuring instrument.
Enclose the completed return form with the CPG1000.
10.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally compat-
ible way and in accordance with the country-specific waste disposal regulations.
28
WARNING!
Residual media in dismounted precision digital pressure gauge can
result in a risk to persons, the environment and equipment. Take sufficient
precautionary measures.
WARNING!
Strictly observe when shipping the CPG1000:
All instruments delivered to WIKA must be free from any kind of hazardous
substances (acids, bases, solutions, etc.).
The return form is available on the internet:
www.wika.de / Service / Return
WIKA Operating Instructions Model CPG1000