Making Changes To The Timer; Copying The Timer - WMF combiNation F 8700 Betriebsanleitung

10.3 Making changes to the timer

10.3.1 Copying the timer

Once a full day's sequence has been set up, it can easily be
copied to other days. Start from the timer setting mode.
Note:
The Copy function can be accessed from any setting
mode (Operating Time, Preselection, Cleaning or
Self-service mode). In each case, the complete day
is copied, with all the actions set, etc.
Under the column heading "Day", press the
symbol panel to access day of the week selection.
1
Then use the arrow keys to scroll to page four, and touch
the soft key.
Copy Day
Now select the day you would like to copy to other days.
For instance, you have already programmed Monday and
now want to transfer your settings to Thursday.
Start by pressing the
The day to be copied will now be stored while you carry
out copying. This is shown in the display as follows:
Next, select the
Insert Day
which you want to copy your Monday settings.
In our example, that day is Tuesday.
Touch the
Tuesday
128
soft key.
Monday
option and select the day to
soft key in the display.