Changing Access Authorisations (Pin Numbers) - WMF combiNation F 8700 Betriebsanleitung

8.3.2 Changing access authorisations (PIN numbers)

The machine is ready for operation and the following
display is shown, or the display for the storage setting
selected:
Pressing the soft key takes you to a second level,
where a selection menu allows you to change the access
authorisations (PIN numbers).
If you have already allocated access authorisations (PIN
numbers), on pressing the soft key you will be asked
for your PIN number. Key in your PIN number. When the
correct PIN number is entered, the selection menu is
displayed. If access authorisations (PIN numbers) has not
been allocated, the request for the PIN number is skipped
and you enter the selection menu straight away.
If you are authorised to alter or manage the access
authorisations (PIN numbers), the following selection
menu will appear, including the soft key. If you do
not have that authorisation, the soft key will not
appear.
On pressing the soft key, the access control menu
appears, showing the PIN numbers currently set for levels
1 to 3 ( , , ). In the example
Cleaning Setting Accounting
shown here, the number is 0000 in each case.
You can allocate your own PIN numbers for levels 1 to 3
( , , ). If you wish to change
Cleaning Setting Accounting
the PIN number for level 1, press the soft key in
Cleaning
the access control menu. The following display will appear,
in which you can key in the new PIN number. The number
keyed in will be displayed in clear. You can correct the
captured number, one digit at a time, by pressing the
soft key. Then press the soft key to accept the new
settings, or press to quit the menu without accepting the
changes.
102