WMF combiNation F 8700 Betriebsanleitung Seite 112

With the vending options, only the last two
digits should be altered to your requirements.
1 0 0 1 0 0 1 0
Do not make any
changes! Changes can
lead to malfunction.
If no currency unit is
shown in the display, set
the second digit to 1.
= 1 means currency
display in € (if currency
display is set to "On")
If an additional machine is connected
ENTER
EXIT
Note:
You can quit this procedure by pressing the "EXIT" key.
All the individual steps which you confirmed by pressing
"ENTER" will be saved.
Machine cleaning
Caution!
Turn off the power supply to the machine before cleaning
the coin changer.
Please follow the manufacturer's cleaning instructions when
cleaning the coin changer. These instructions can be found in the
enclosed Quick Reference sheet, where all the cleaning steps are
described in detail.
114
= 0 means that change is given each time a product is
dispensed.
= 1 means that several products can be dispensed until
the value of the coins has been used up.
(multiple sales)
= 0 coins can be changed even without dispensing any
products.
= 1 coin changer is only active after product
dispensing.
(purchase compulsory)
Vending Options
10010010 >>
Slave Option
Slave mode
No change
01
>>