WMF combiNation F 8700 Betriebsanleitung Seite 101

For example, if you have chosen the PIN number 1234 for
level 1 the following display will appear if no
Cleaning
PIN number has been allocated yet for the higher levels 2
and 3. The PIN number for the lower levels is therefore
used for the higher levels. In the example shown here, the
PIN number 1234 has also been used for level 2
and level 3
Accountin
If the PIN number for one level is cleared by keying in the
PIN number 0000, the PIN numbers for the lower levels
will also be cleared. If the PIN number 0000 is allocated,
no PIN number is requested for the corresponding level and
access is unrestricted (as a rule, level 1
If you wish to change the PIN number for level 2, press the
soft key in the access control menu. The
Setting
following display will appear, in which you can key in the
new PIN number. The number keyed in will be displayed
in clear. You can correct the number entered, one digit at a
time, by pressing the
accept the new settings, or press
without accepting the changes.
For example, if the PIN number 9876 has been chosen for
level 2 the following display will appear if no
Setting
PIN number has been allocated yet for the higher level 3.
If you wish to change the PIN number for level 3, press the
soft key in the access control menu. The
Accounting
following display will appear, in which you can key in the
new PIN number. The number keyed in will be displayed
in clear. You can correct the number entered, one digit at a
time, by pressing the
key to accept the new settings, or press
without accepting the changes.
For example, you can select the PIN number 7777
for level 3
Accounting
.
g
Cleaning
soft key. Press the
to quit the menu
soft key. Then press the
to quit the menu
.
Setting
).
soft key to
soft
103