Product Selection - WMF combiNation F 8700 Betriebsanleitung

The following display appears:
Press the or
coffee or hot water, starting from the current setting. The
change is displayed both graphically and as a percentage.
By pressing the soft key at any time during setting, you
can activate test dispensing to check the selected setting.
The following display appears:
Press the
cup coffee
If there is no coffee in the storage urn, the following
message is displayed:
Press the soft key to accept the new settings, or press
to quit the setting menu without accepting the changes.
Press the soft key to scroll to the next settings page.

8.2.2 Product selection

To set or alter product allocation to a product key on the
control panel, press the
The following display appears. This list contains standard
product settings, which you can allocate to the individual
product keys.
Important note:
When you alter the product selection, the individual
settings are overwritten by the default values for the
product selected (factory settings).
If you only want to alter the settings for a product
key that has already been allocated, skip this setting
step.
soft keys to alter the quantity of
soft key to start test dispensing.
soft key.
Product
97