WMF combiNation F 8700 Betriebsanleitung Seite 124

Touch the centre of the symbol panel to see all the options
that can be set in Self-service mode in clear text,
with the function already selected highlighted in white:
In Self-service mode, you can program the self-service
options:
- Switch on or
- Switch off.
To do this, touch the setting you want.
That setting then appears as a symbol in the display:
SelfServ.Mode off
SelfServ.Mode on
Press the soft key to confirm your choice.
OK
A programmed switching time can be cleared by pressing
the soft key.
C
If you use the Plus (up arrow) and Minus (down arrow)
keys in the "Action" column, after scrolling through the
setting options in Self-service mode, you will automatically
move on to the setting options in other modes, such as
Preselection mode (see chapter 10.1.2 on page 122),
Operating Time (see chapter 10.1.1 on page 119) or
Cleaning mode (see chapter 10.1.3 on page 124).
The column heading "Prg" denotes the 16 switching times
that can be set for each day. Once you have pressed the
soft key to confirm the desired action, all the programmed
switching times will automatically be sorted in
chronological order.
By pressing the "Clock i" soft key in the display as a
check, you can access the Timer Check directly (see
chapter 10.2 Timer check on page 127).
126
OK