Resetting The Filling Quantities To The Default Setting - WMF 5 Bedienungsanleitung

Operating the machine
>
>
The ready indicator starts to flash white after 3 seconds to indicate that the teach-in mode has been
activated.
>
>
The ready indicator stops flashing to confirm that programming was successful.
If you want to set the filling quantity to the maximum, do not press the button again. The machine
automatically stops dispensing the coffee when the maximum quantity has been reached.
The program remains set until it is changed or reset to the default quantity.
>
End preparation
>
3.3
>
This resets all of the personal filling quantities programmed in the teach-in mode to the default values.
Coffee small
Large coffee
16
Wait until the ready indicator lights up white.
Hold the button for the beverage for which you want to change the filling quantity pressed down
(coffee large or coffee small).
Let go of the button and monitor the filling level.
Press the button as soon as the required filling level has been reached.
B
Turn the adjusting knob back to the home position , when no more liquid is being dispensed.
Remove the coffee pads used during brewing from the pad cartridge.

Resetting the filling quantities to the default setting

H
Press the On/Off button and the x2 button
up white briefly 3 times.
Approx. 60 ml
Approx. 130 ml
D
at the same time until the ready indicator lights