Timer Functions - WMF combiNation F 8700 Betriebsanleitung

10 Timer functions

The timer in your WMF combiNation F gives you total
independence and flexibility. The timer takes over routine
tasks such as
- Switching the machine on and off
- Changes to the quantity of coffee prepared
- Starting machine cleaning cycle
- Switching over the machine to self-service mode
Up to 16 switching times each day can be programmed in.
The machine is ready for operation and the following
display is shown, or the display for the storage setting
selected:
By pressing the
empty urn symbol in the display, you can access a second
level, where there is a selection menu that contains the
Timer function.
To set the timer, or to alter previous timer settings, or to
call up information about the timer, press the "Clock" soft
key in the selection menu.
The following display appears:
To activate the timer in your coffee machine, press the top
soft key in the display, "Timer state OFF". The soft key in
the display will change to "Timer state ON" and the timer
is now active. The machine will carry out your preset
switching times and actions. Press the "Timer state ON"
soft key again to deactivate the timer.
Normally, a small black clock in the display indicates that
the timer is active:
118
soft key or by pressing directly on the