Memory Back-Up - Yamaha AV-S77 Bedienungsanleitung

Connecting the AC Power Supply Cord
Subwoofer
DO NOT CONNECT THIS UNIT TO
SPEAKERS OTHER THAN AV-S77C,
NX-S77E
SPEAKERS
PHONES
SILENT
SYSTEM
MARK MARK
(BLACK) (WHITE)
CONNECTOR
MAINS

Memory back-up

The memory back-up circuit prevents the following
settings from being lost even when this unit is in the
standby mode, the power supply cord is disconnected
from the AC outlet, or the power supply is temporarily
cut due to a power failure.
– Volume level
– Input source
– Input name
– Dimmer
– Auto power off
– Memory
Once all connections have been made, check them one more
time. Finally, insert the plug of the power supply cord of the
subwoofer into an AC outlet. Disconnect the power supply
cord if you will not use the unit for an extended period.
Note
• When disconnecting the power supply cord, turn off the power of
the front speaker unit beforehand.
AC outlet
– Bass boost
– Night mode
– Main display
– DSP program selected with input source
– Effect on/off
– Channel level (left and right main channels, center
channel, left and right rear channels and subwoofer)
(When the silent cinema or virtual surround program is
selected, the rear channel level is also stored.)
– Delay time
– Power status just before the power is cut off (standby
mode or power on)
CONNECTIONS
19
E-