Setting Up The System; System Configuration - Yamaha TSS-1 Bedienungsanleitung

System configuration

This system includes an amplifier unit, five satellite
speakers and a subwoofer.
The three satellite speakers with a 3 m cord are used as
front speakers and a center speaker.
The two satellite speakers with a 7 m cord are used as
surround speakers.
The role of respective speakers
The front speakers are used for reproducing main channel
sound. The surround speakers are used for effect sounds,
and the center speaker is for center channel sound (dialog
etc.).
The subwoofer is used for reproducing sounds of low
frequencies from the front, center and surround channels.
The subwoofer also reproduces sounds of the subwoofer
channel when a DTS or Dolby Digital encoded source is
played.
4
E-

Setting up the system

Left front
speaker
Amplifier
unit
Subwoofer
Recommended speaker placement
Before making connections, place all speakers in their
respective positions. The positioning of the speakers is
important because it controls the overall sound quality of
this system.
Place the speakers depending on your listening position by
following the instructions below.
* The satellite speakers can be mounted on a wall. (See the
next page.)
Front speakers:
Surround speakers:
Center speaker:
Subwoofer:
Right front
speaker
Center
speaker
Left
surround
speaker
On both sides of and at approximately
the same height as the TV (or computer
monitor).
Behind your listening position or on
both sides of the listening room.
Precisely between the front speakers.
* The center speaker can be mounted
on the monitor as shown on the next
page.
On the floor. The position of the
subwoofer is not so critical because low
bass tones are not highly directional.
Right
surround
speaker