Menu Functions; Setting Auto Power Off; Setting The Sleep Timer - Yamaha AV-S77 Bedienungsanleitung

The menu functions include:
– "Sleep Timer" for setting the sleep timer
– "Auto Power" for setting the automatic power off
– "Dimmer" for adjusting the display brightness
– "Input Name" for naming inputs
– "Delay Time" for adjusting the delay time used for the
surround sound
Adjustments on the menu functions should be performed
with the remote control.
Each time MENU on the remote control is pressed, the
function changes in the following order: "Sleep Timer",
"Auto Power", "Dimmer", "Input Name", "Delay Time",
and main display.
• When DSP program No. 3-1 through No. 7 is used,
"Delay Time" is not displayed.
POWER
MENU LEVEL
MENU
–/+ –
NIGHT
INPUT h/g
B. BOOST INPUT

Setting the Sleep Timer

The unit will automatically be set to standby mode after a
period of time passes.
1
Press MENU to display "Sleep Time".
MENU
2
Press + or – to select a desired period of time
until the unit is set to standby mode.
–
When you press +, the time changes in the order, OFF,
30 min, 60 min, 90 min and 120 min.
When you press –, the time changes in reverse order.
28
E-

MENU FUNCTIONS

AV-S77
—— MEMORY ——
1 2 3
TEST DISPLAY
EFFECT MUTE
+
ON/OFF
+
h h
DSP VOL
–
g g
h
+
To cancel the sleep timer, press – until "OFF" is displayed.
y
• If you set the unit to standby mode by pressing POWER p, the
sleep timer will be canceled.
• To check the remaining time while the sleep timer is functioning,
press MENU until "Sleep Time" appears.
When the setting is completed
After about 10 seconds, the unit returns to the main display
("input name" or "DSP program name" display). Or, press
MENU until the main display appears.

Setting Auto Power Off

The Auto Power Off function works as described below.
No signal is input and no button is operated for about 30
minutes.
The unit enters the Auto Power Off mode.
(The STANDBY indicator lights.)
You can set the sensitivity for the Auto Power Off function
or disable the Auto Power Off function.
1
Press MENU to display "Auto Power".
MENU
2
To set Auto Power Off, select the "Auto Pwr: 2"
using +/–. To disable the Auto Power Off
function, select the "Auto Pwr: OFF" using –.
–
@
+