Cleaning The Exhaust Air Filter; Cleaning The Housing And Nozzles - Cleanmaxx Z 08184 Gebrauchsanleitung

EN
5. Tap out all the parts over a dustbin and brush off the loose dirt.
6. If necessary, thoroughly rinse the fi lters using clear, lukewarm water.
CAUTION: Do not use any cleaning agent!
Then shake off any excess water and let the fi lters dry completely in the air.
7. Clean the cyclone insert and dust container with a damp cloth.
8. When all parts are dry, insert the cyclone insert back into the dust container. Make
sure that you insert the three catches on the edge of the cyclone insert correctly into
the right notches in the dust container.
9. After it has dried, place the foam fi lter into the fi lter holder and plug the holder onto
the cyclone insert.
CAUTION: Under no circumstances should you place damp device parts into
the dust container!
10. Place the lid onto the dust container so that the line marked on the edge of the lid is
next to the
11. Then turn the lid as far as it will go towards the
12. Insert the dust container into the device. Make sure that it audibly locks in place.
If the fi lters are damaged or worn, you can order new fi lters at
www.service-shopping.de.

Cleaning the Exhaust Air Filter

The exhaust air fi lter is located on the back of the vacuum cleaner.
18
4. If necessary, brush or wipe the fi lter compartment clean.
5. Place the dry fi lter back into the fi lter holder.
6. Insert the fi lter holder into the fi lter compartment.
7. First insert the top of the exhaust air grille into the device, press the catch of the
protective grille upwards and then fl ip it shut.
If the exhaust air fi lter is damaged or worn, you can order a new fi lter at
www.service-shopping.de.

Cleaning the housing and nozzles

• If needed, clean the housing with a damp, soft cloth.
• Regularly remove hair and lint from the nozzles.
symbol on the dust container.
1. Press the catch (16) for the exhaust air grille upwards and
remove it.
16
2. Take out the fi lter holder (17).
3. Remove the foam fi lter (18) and tap it out over a dustbin.
You can also rinse the fi lter with clear, lukewarm water.
17
CAUTION: Do not use any cleaning agent!
Then shake off any excess water and let the fi lter dry
completely in the air.
22
symbol.