Cleaning The Exhaust Air Filter; Storage; Troubleshooting - Cleanmaxx Z 09271 Gebrauchsanleitung

EN
dust container so that the arrow marking on the dust container lid points towards the
closed lock symbol on the dust container.
9. Place the dust container into the device: Hold it by the handle and place the bot-
tom of the container into the device fi rst. Then push the handle against the device
housing until the dust container is heard to lock in place. Hold the device by the
handle and lift it to check that the dust container is in the correct position.

Cleaning the Exhaust Air Filter

The exhaust air fi lter is located in the compartment on the back of the vacuum cleaner
(see „Items Supplied and Device Overview" chapter, „Rear View" section).
5. When all parts are dry, insert the exhaust air fi lter in the fi lter compartment.
6. Place the fi lter compartment lid onto the exhaust fi lter compartment. It must engage
audibly.

Storage

• You can hook the fl oor nozzle into the bracket on the back of the device for convenient
storage and push the telescoping tube together as far as possible.
• Store the vacuum cleaner in a dry, cool indoor room that is not accessible for children
and animals.

Troubleshooting

If the device should stop working properly, fi rst check whether you are able to correct
the problem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
The vacuum
cleaner has no
suction power.
26
1. Press the fi lter compartment lid catch and remove the lid.
2. Remove the exhaust air fi lter by pulling it down and out of
the fi lter compartment.
3. Tap out the contents of the exhaust air fi lter over a dustbin
and brush off the loose dirt. Wipe down the dust container
using a damp cloth.
4. If necessary, thoroughly rinse the exhaust air fi lter using
clear, lukewarm water. CAUTION: Do not under any cir-
cumstances clean the fi lter in a washing machine or
dishwasher! Then shake off any excess water and allow
the fi lter to dry completely in the air before reinserting it.
Potential cause/solution/tips
• Is the mains plug not correctly connected with the socket?
Correct the position of the mains plug.
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Are the fi lters plugged? Clean the dust and exhaust fi lter.