Cleaning The Filters In The Dust Container; Cleaning Or Replacing The Exhaust Air Filter; Cleaning The Housing - Cleanmaxx XL-306E-220 Gebrauchsanleitung

Cleaning the filters in the dust container

Clean the filters in the dust container from time to time or when they are visibly soiled.
5. After cleaning, assemble the two filter again. Align them so that the ALIGN marks on the
filters are facing one another.
6. Install the filters in the dust container again and close the housing by turning in clockwise
direction.

Cleaning or replacing the exhaust air filter

1. Press down the button in the middle of the protective grille and remove the grille.
2. Take out the exhaust air filter.
3. Shake the exhaust air filter thoroughly.
4. Place the exhaust air filter back into the vacuum cleaner housing.
5. First engage the protective grille in the recesses at the bottom, then fold it upwards with the
button depressed until it engages.

cleaning the housing

• Clean the housing, when necessary, using a slightly damp soft cloth.
• Remove hair and fluff from the nozzles at regular intervals.
08190_DE-GB-FR-NL_V3.indb 27
Downloaded from www.Manualslib.com
1. Turn the filter housing in anti-clockwise direction and remove the
filters. Pull off the outer filter.
2. Tap the filters to clean over an open dustbin.
3. Clean the inner HEPA filter, if necessary, using a soft brush.
4. Wash out the filter with lukewarm water and allow it to dry
completely.
The exhaust air filter is located on the rear of the vacuum cleaner
behind a protective grille. It filters the air as it leaves the vacuum
cleaner and before it is returned to the ambient air. Clean the
exhaust air filter from time to time.
manuals search engine
27
20.11.12 15:18