Device Cleaning And Storage; Emptying The Collecting Container And Cleaning The Filter - Cleanmaxx WE-803-C Gebrauchsanleitung

Device cleaning and Storage

cAutIOn!
❐ Make sure that the device is switched off before cleaning it.
❐ Never immerse the motor housing or charger in water or other liquids.
❐ The device must not be connected to the charger during cleaning of the collecting container.
❐ Never use soap or other cleaning products to clean the dust fi lter. This would cause damage
to the fi lter. Only ever use cold, clear water for cleaning.
❐ Do not use any corrosive or abrasive cleaning agents to clean the housing. They could
damage the surfaces. If necessary, clean the housing using a slightly damp, soft cloth.

Emptying the collecting container and cleaning the Filter

1. Hold the device fi rmly by the handle and keep it as horizontal as possible.
4. Empty the collecting container into a rubbish bin. Rinse the dust container (without the
fi lter!) if necessary using warm water and mild detergent.
7. Let all parts dry completely before you put them back together. cAutIOn: never insert
the fi lter while it is still damp. The device is assembled in the reverse order.
8. Store the device in a dry, cool place that is not accessible to children and animals.
08314_DE-GB-FR-NL_V0.indb 23
2. Press the release button and remove the collecting container.
3. Remove the dust fi lter from the collecting container.
5. Detach the air guidance part from the dust fi lter by turning it to
the left and pulling it upwards, as shown in the picture. When
you reinsert the air guidance part, make sure that the
air opening points upwards.
6. Rinse the dust fi lter if necessary with cold, clear water.
23
10.12.12 17:16