Suction Nozzles; Assembly; Inserting / Removing The Suction Hose - Cleanmaxx Z 08184 Gebrauchsanleitung

EN

Suction nozzles

ATTENTION!
■ Always turn off the vacuum cleaner fi rst before changing the nozzles.
Floor nozzle
Combi nozzle (Tile/brush nozzle)

Assembly

ATTENTION!
■ Risk of suffocation! Keep the packaging material away from children and animals.
■ Make sure that the device is not connected to the mains electricity supply before you
attach or remove the accessories.
1. Unpack all parts and make sure that the product contents are complete (see chapter
"Items Supplied") and check for any damage from transport. If you identify damage
to the components, do not use them (!), instead contact our customer service centre.
2. Before using the device, remove all packaging materials and any labels and trans-
port restraints that may be on the device and are used for protection during trans-
portation or for advertising.
3. Attach the suction hose, the telescopic tube and a suction nozzle to the motor unit
(see below).

Inserting / Removing the Suction Hose

The fl oor nozzle is suitable both for carpets and smooth fl oors.
With the foot switch, you can switch between smooth fl oor and
carpet. A brush is deployed on the bottom for smooth fl oors.
Turn the brush adapter in the direction of the arrow to convert the
tile nozzle into a brush nozzle:
• The tile nozzle is suitable for cushions, cleaning the inside of
passenger vehicles as well as all nooks and crannies that can't
be reached with other nozzles.
• The brush nozzle is suitable for all uneven objects, furniture,
lamps, profi ling strips and skirting boards, window sills etc.
• Plug the connection piece of the suction hose into the suc-
tion intake opening on the dust container. It must engage
properly.
• To remove the suction hose, press the release button on
the connection piece and pull it off.
18