Inserting/Removing The Telescopic Tube; Adjusting The Length Of The Telescopic Tube; Removing / Inserting The Dust Container - Cleanmaxx Z 08184 Gebrauchsanleitung

Inserting/removing the telescopic tube

Adjusting the length of the telescopic tube

Attaching / Removing Suction Nozzles

Removing / Inserting the Dust Container

19
• Insert the open end of the handle into the corresponding
opening of the telescopic tube. At the same time twist the
handle gently backwards and forwards. Afterwards, check
the connection for secure seating.
• To remove the telescopic tube, pull it out of the handle.
• Push the slider on the telescopic tube and set the desired
length.
• Release the slider and move the tube forward until it locks
into place.
• Plug the free end of the telescopic tube as far as it will go
into one of the suction nozzles supplied. Twist the nozzle
back and forth slightly as you do this.
• For greater fl exibility, the suction nozzles can also be
plugged directly onto the handle of the suction hose, with-
out the telescopic tube.
• To detach a suction nozzle, pull it off.
• Removing: Hold the dust container handle and pull the
dust container out of the motor unit.
• Inserting: Plug the closed dust container into the motor
unit until it is heard to engage in the locking mechanism.
EN