Setting Automatic Updates For The Time And Date; Active Accry (Accessory) Type; Selecting The Active Accessory (Accry) Type; Volume Cntrl (Control) - Motorola MTM800 FuG Bedienungsanleitung

88 | Main Menu
Note: You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or behind.
4 Press Done.

Setting Automatic Updates for the Time and Date

Procedure:
1 From the home screen, press the
2 Select Setup → Time & Date → System Update.
3 Select one of the following:
• Off — All the infrastructure informations are ignored. The radio uses internal time and offset.
• Time Only — Time displayed is calculated from the offset programmed by your service provider added or
subtracted from the infrastructure time.
• Time & Offset — Time and offset are updated after receiving from the infrastructure.

Active Accry (Accessory) Type

This menu item allows you to choose which of the accessory selection mode is active.

Selecting the Active Accessory (Accry) Type

When and where to use: Use this menu item to determine which microphone has priority during Alternating Hot
Microphone or Ambience Listening.
Procedure:
1 From the home screen, press the
2 Select Setup → Active Accessory Type.
3 Select one of the following:
• Control Head Accry — Higher priority is given to the microphone connected to the control head.
• Transceiver Accry — Higher priority is given to the microphone connected to the transceiver.
• Control Head Accry — Higher priority is given to the microphone connected to the control head. Applicable
to RECH.
• Transceiver Accry — Higher priority is given to the microphone connected to the transceiver. Applicable to
RECH.
• Front Accry — Higher priority is given to the microphone connected to the front accessory connector.
Applicable to TSCH.
• Rear Accry — Higher priority is given to the microphone connected to the rear accessory connector.
Applicable to TSCH.
Note: In case the PTT on any connected accessory is pressed, the highest priority is assigned to that
accessory.

Volume Cntrl (Control)

This menu item allows you to determine which audio output device, speaker or earpiece, is being adjusted when you
turn the .
ROTARY KNOB

Setting Volume Cntrl (Control)

Procedure:
1 From the home screen, press the
2 Select Setup → Volume Cntrl.
Send Feedback | |
key.
MENU
key.
MENU
key.
MENU