When and where to use: You can return a voice call to the sender of a message or to any number that is embedded in
the message text.
Procedure:
1 From the home screen, press the
2 Select Messages → Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
5 Radio displays a list of the numbers (including the senders number).
6 To call, highlight to the required number and press the PTT button or the S
7 Select Ctype to choose the type of call (Private, Phone, or PABX).
8 Press the PTT button or the S
Making Group Calls on theTalkgroup of the Message Sender
Prerequisites: Embedded Number feature is enabled by your service provider.
Procedure:
1 From the home screen, press the
2 Select Messages → Inbox.
3 Highlight the required message and press the PTT button.
Immediate Message
When the new immediate message is received, radio plays the New Mail Received tone and displays the content
overlapping your previous screen. All immediate messages are stored in the Inbox. If the radio is in PIN Lock state,
immediate message is displayed after correct PIN is entered.
Note: This is a selling feature.
Outbox
Outbox stores all sent messages.
Table 18: Outbox Icons
Icon
key.
MENU
key.
END
key.
MENU
Description
Delivery in Progress
Delivery Accomplished
Delivery Failed
Successful Outgoing Message
Failed Outgoing Message
Main Menu | 71
key.
END
| |
Send Feedback