Motorola MTM800 FuG Bedienungsanleitung Seite 127

Appendix
C
Troubleshooting
Your radio displays the following messages:
Table 28: Displayed Messages
Message
...-Received
Attachment Failed
Authenticate Failure
Call Cancelled
Call Ended
Call Forwarding
Call Modified
Call Preempted
Decryption Failed:
Emergency In Use
Wait For Mic
Emgcy Mic Ended
Emergency Mic On
Empty Entry
Faulty Unit
Error
Gateway available
Gateway not available
Message Description
Call received but not answered, or rejected.
Your radio could not perform talkgroup attachment. It keeps on try-
ing. If it does not succeed, try another talkgroup.
Your radio could not register on an authenticated system (for exam-
ple, the Authentication Key is incorrect, or authentication is disa-
bled).
You have canceled the call.
• Faulty channel. Please try later.
• You have ended the call.
The radio you are trying to call is not available and the call is being
forwarded to another radio.
The call you are participating in has been modified.
Channel being used for priority.
An error occurred while decrypting a message or call.
The Hot Microphone feature is active, but the channel transmit grant
has been given to another Emergency call on the same talkgroup.
Your radio microphone is not active during this time, but it automati-
cally tries to regain talk permit after a predetermined time.
The Hot Microphone timer automatically expired, or you pressed the
PTT button to cancel the Hot Microphone feature.
The Hot Microphone feature is active, and your radio is automatically
transmitting hands free emergency audio.
The speed number you dialed does not exist, or the number exists but
the group is non-selectable.
Self-test failed. An operational fault has been detected with your ra-
dio. Record the error number. Turn your radio off and contact service.
Your radio has connected to a gateway.
Your radio cannot connect to a gateway, or connection has been lost.
125 | Troubleshooting
Table continued...
| | Send Feedback