Communication Through Gateways; Selecting Dmo Group Call Options - Motorola MTM800 FuG Bedienungsanleitung

50 | Modes
DMO
When the radio connects to a repeater, it plays a tone, displays the Repeater available message, and shows an
appropriate icon. When the radio looses connection with the repeater, it plays a tone, displays the Repeater not
available message, and the repeater icon is blinking.

Communication through Gateways

Gateway provides connectivity between radios operating in DMO Mode and the TETRA network, so that the DMO
radios can communicate with the TMO radios.
TMO
When the radio connects to a gateway, it plays a tone, displays the Gateway available message and shows an
appropriate icon. When the radio looses connection with the gateway, it plays a tone, displays the Gateway not
available message, and the gateway icon is blinking.

Selecting DMO Group Call Options

When and where to use: Helps to communicate with other radio users on the same talkgroup through the Gateway or
Repeater.
Procedure:
1 From the home screen, press Optns.
2 Press Config.
3 Select one of the following:
Send Feedback | |
DMO
TMO
DMO