102 | Main Menu
Viewing Encryption Status
Procedure:
1 From the home screen, press the
2 Select More . . . → Packet Data → Encryption.
3 The encryption state of the ongoing packet data session is displayed:
•
Packet Data Channel Clear
•
Packet Data Channel Encrypted
•
EncryptionN/A (clear)
Crypto Menu
This sub-menu allows you to manage SIM card based End-to-End Encryption.
The End-to-End Encryption is used for:
•
Encryption of voice transmission in the DMO and TMO Modes.
•
Encryption of messages transmission in the TMO Mode.
•
Encryption of messages transmission in the DMO Mode (the radio cannot be in call).
•
Encryption of position data (GPS) transmission in the TMO and DMO Modes.
•
Transfer of Operational Tactical Address (OPTA) in the TMO and DMO Modes.
•
Management of encryption keys in the TMO Mode.
Enabling/Disabling SIM Card End-to-End Encryption
Prerequisites:
•
The radio is not in an active call.
•
You cannot press the PTT button.
To enable/disable SIM Card End-to-End Encryption, use one of the following ways:
•
Press a One-Touch Button ascribed to enabling/disabling SIM Card End-to-End Encryption
•
From the home screen, press MENU → Crypto Menu → Crypto Function. Select Encryption On to enable or
Encryption Off to disable encryption.
Result: Your radio displays prompts indicating your current encryption state: an appropriate status icon and
Encryption On or Encryption Off message.
Setting Clear Call Alarm
When and where to use: Use this menu item to configure an alarm tone notifying about any clear transmission.
Procedure:
1 From the home screen, press the
2 Select Crypto Menu → Clear Call Alarm.
3 Select Simplex Calls or Duplex Calls.
4 Select one of the following:
•
Off – the alarm is disabled.
•
Single – the alarm sounds once at the beginning of a clear call.
•
Continuous – the alarm sounds periodically throughout a clear call.
Send Feedback
| |
key.
MENU
key.
MENU