New Message; Sending Messages To Private/Phone; Sending Messages To Groups - Motorola MTM800 FuG Bedienungsanleitung

Messages
This feature allows you to send and receive text messages. A message can contain up to 1000 characters, depending
on your service provider settings.
Note: When you receive a message that cannot be decrypted, your radio displays a notification entitled
Incoming SDS with the following information in its content:
• ISSI address of the sender.
• Decryption Failed:
message.
• Decryption fail reason: Wrong Key, No Key, or SIM Error.
To close the notification, press the right SOFT key or the E
Pressing the PTT button when a message is highlighted can cause one of the following actions, depending on your
service provider settings:
• The radio ignores the PTT button request.
• The radio starts a Private Call with the message sender.
• The radio starts a Group Call on a currently selected talkgroup.

New Message

This menu item allows you to create a new message.

Sending Messages to Private/Phone

Procedure:
1 From the home screen, press the
2 Select Messages → New Message.
3 Enter your message and press Send.
4 If needed, select Private/Phone.
5 Enter recipient number or press abc to choose it from your contacts.
Note:
For Private target selection, you can enter either Individual Short Subscriber Identity (ISSI) or Group
Short Subscriber Identity (GSSI) of the recipient.
ISSI – a unique, individual ID assigned for each radio.
GSSI – in Dimetra called Group ID or Talkgroup ID.
6 Press Send, or S
END

Sending Messages to Groups

Procedure:
1 From the home screen, press the
2 Select Messages → New Message.
3 Type your message and press Send.
4 If needed, select Group.
5 Select a group to send the message.
key.
MENU
key, or the PTT button.
key.
MENU
key.
ND
Main Menu | 67
| | Send Feedback