86 | Main Menu
•
Text — To set the text on the screen saver when this feature is activated.
Setting Backlight
Procedure:
1 From the home screen, press the
2 Select Setup → Display → Backlight.
3 Select one of the following:
•
Auto – backlight is triggered by turning on the radio, by pressing any key on the device or on the accessory
that is connected to it. Also getting signal from the services like: Call-Out message, DGNA and TX timeout
during priority call are going to turn on the backlight.
•
Semi Auto – backlight is turning on when you are switching on the radio or pressing a button assigned to the
backlight feature.
•
Manual – backlight is toggled by pressing the B
•
On – backlight is always on.
Note: Setting the backlight intensity level by pressing the B
backlight, and E
Setting Wallpaper
When and where to use: To change the look of the home screen.
Procedure:
1 From the home screen, press the
2 Select Setup → Display → Wallpaper.
3 Select one of the following:
•
On — To activate this feature.
•
Off — To deactivate this feature.
Time and Date
This sub-menu controls the displayed time and date on the home screen.
Note: If the Home Display Text Message feature is enabled, Home Mode Display Text may cover time and
date, depending on the Configurable Idle Screen settings.
Note: Infrastructure synchronizes the time and date. When not within the infrastructure signal range you
can set the values manually.
Setting Time and Date on the Display
Procedure:
1 From the home screen, press the
2 Select Setup → Time & Date → Display.
3 Select one of the following:
•
Time & Date — Your radio displays time and date.
•
Time Only — Your radio displays time only. Format Date sub-menu is disabled.
•
Date Only — Your radio displays date only. Format Time sub-menu is disabled.
•
Off — Your radio does not display time nor date. Format menu is disabled.
Send Feedback
| |
key.
MENU
ACKLIGHT
button backlight intensity.
MERGENCY
key.
MENU
key.
MENU
key.
key changes the LED, keypad
ACKLIGHT