Data Setup; Setting Data Function; Audio; Audio Profiles - Motorola MTM800 FuG Bedienungsanleitung

82 | Main Menu

Data Setup

This menu item allows you to set up your radio to transmit and receive data from the external device.
To connect your radio accessory connector to the external device, use the PMKN4104 cable. The external device
must run an application complying with the TETRA standards.
Note:
• Data services are available only in TMO Mode.
• Data services are blocked in TXI Mode.

Setting Data Function

Procedure:
1 From the home screen, press the
2 Select Setup → Data Setup.
3 Select one of the following:
• Voice Only — Your radio receives and transmits voice calls only.
• Data Only — Your radio acts as a modem. It rejects incoming and outgoing voice calls (except for Emergency
Calls), status and text messages.
• Voice & Data — Your radio acts as a modem but voice calls have priority over data calls and can interrupt
them.

Audio

This menu item allows you to adjust your radio audio settings.

Audio Profiles

An audio profile is a set of audio parameters, such as the volume of alert tones, that are configured by your service
provider to fit a particular operating environment. For example, the audio parameters can be adjusted to situations
when the radio operates on a noisy street.
If programmed, the radio displays a name of a currently used audio profile (on the home screen) and/or an appropriate
icon associated with the profile (in the status icon area). Your service provider can configure a maximum of two
audio profiles.
For a detailed description of a specific audio profile, contact your service provider.

Setting Audio Profiles

When and where to use: To adjust the audio parameters of the radio its current operating environment.
Procedure:
1 From the home screen, press the
2 Select Setup → Audio → Audio Profile.
3 Select a required profile.

Volume Adjustment Mode

You can set the volume to Individual or Common. When it is set to Individual, the volume level for Voice, Duplex,
Simplex, Earpiece, Speaker and Keypad can be set per user preferences. When set to Common, the audio has one
setting for all items.
Send Feedback | |
key.
MENU
key.
MENU