Writing In Tap Alphanumeric; Word Locking; Adding Words To The Dictionary; Home Display Text Message - Motorola MTM800 FuG Bedienungsanleitung

Writing in TAP Alphanumeric

Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press M → Entry Setup → Seco..
ENU
2 Select TAPEnglish and press Back.
3 Press M → Entry Mode.
ENU
4 Select Secondary.
5 Press the key labeled with the desired character, once for the first character, twice for the second, and so on.
Example: To enter letter s, press 7 key four times. To enter number 7, press the 7 key five times. If you do
not press a key for a few seconds, the character is accepted, and the cursor moves to the next position.

Word Locking

Prerequisites: Your radio displays the text entry screen.
When and where to use: To add the words that are not in the dictionary.
Procedure:
1 Press M → Entry Setup.
ENU
2 Select iTAPEnglish.
3 Try to enter the word. Scroll the alternate line for a word option. Each option is successively highlighted and
partially locked.
4 Enter the second part of the word. The first part remains unchanged (locked). The newly entered letters are
highlighted and then locked while you scroll to the next word option.
5 Press * key. The word is placed in the text area with a space and automatically added to the dictionary.

Adding Words to the Dictionary

Each language comes with its own dictionary. You can create words (including alphanumeric abbreviations). Once
you enter a word followed by space, it is automatically stored in the dictionary and appears as a choice whenever you
press the same key combination in the future.

Home Display Text Message

Your radio is provided with a feature that allows your service provider to send special text messages to the display.
The message stays on the home screen until a new message is received. Power cycle your radio to replace the Home
Display message to the predefined one.
Getting Started | 39
| | Send Feedback