Logging Off; Networks; Selecting Network Operation Mode; Selecting Your Network - Motorola MTM800 FuG Bedienungsanleitung

Logging Off

Procedure:
1 From the home screen, press the
2 Select RUI → Log off.
3 Press Accept.

Networks

This menu item allows you to switch between the radio operation modes.

Selecting Network Operation Mode

Procedure:
1 From the home screen, press the
2 Select Networks.
3 Select one of the following:
• Networks Sel — Selects the network to which the radio is allowed to register.
• Trunked Mode — Switches to the mode using infrastructure.
• Direct Mode — Switches to the mode without using infrastructure.
• Repeater Mode — Switches to the Repeater Mode.
• Gateway Mode — Switches to Gateway Mode.
• TXI Mode — Select Activate to stop sending any radio transmission.
Note: If the radio is in TXI Mode, it is not possible to switch from Direct Mode to Trunked Mode
or Repeater Mode, or Gateway Mode.

Selecting Your Network

Procedure:
1 From the home screen, press the
2 Select Networks → Networks Sel → Home Only.
3 Your radio registers to the home network. If several home networks are defined, the radio registers to the first
available network on the list.

Using the Select Net Registration

Procedure:
1 From the home screen, press the
2 Select Networks → Networks Sel → Select Net.
3 Select the required network from the list.
Your radio registers to the selected network.
key.
MENU
key.
MENU
key.
MENU
key.
MENU
Main Menu | 99
| | Send Feedback