Herunterladen Inhalt Inhalt Diese Seite drucken

Accry (Accessory) Setup; Configuring Control Head Accessories; Configuring Transceiver Accessories - Motorola MTM800 FuG Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für MTM800 FuG:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3 Select one of the following:
Earpiece — By turning the
Speaker — By turning the

Accry (Accessory) Setup

This menu item allows you to manually configure audio accessories that do not install automatically after plugging
them in. Accessories intended for the control head and the transceiver differ and are configured separately.
Note: One control head can support only one external speaker at the same time, either a speaker connected
to the control head, or to the transceiver. When you select one external speaker, the other becomes
unselectable from the menu.

Configuring Control Head Accessories

When and where to use: Use this menu item to configure audio accessories for the control head.
Procedure:
1 From the home screen, press the
2 Select Setup → Accry Setup → CH Accry.
3 Select one of the following:
GCAI Fronthead — Contains a list of preconfigured accessories that can be connected to the front connector
on the RECH.
Secondary Accry — Contains a list of preconfigured accessories that can be connected to Hearer Speaker
Microphone (HSM).
GCAI Backhead — Contains a list of preconfigured accessories that can be connected to the back connector
on the RECH.
Visor Mic Backhead — Contains a list of preconfigured visor microphones that can be connected to the back
connector on the RECH.
Ext Speaker Backhead — Contains a list of preconfigured external speakers that can be connected to the
back connector on the RECH.
Second Mic Cradle — Contains a list of preconfigured microphones that can be connected to the TSCH
cradle.
Ext Speaker Cradle — Contains a list of preconfigured speakers that can be connected to the TSCH cradle.
Note: Lists of accessories are configured by your service provider.

Configuring Transceiver Accessories

When and where to use: Use this menu item to configure audio accessories for the transceiver.
Procedure:
1 From the home screen, press the
2 Select Setup → Accry Setup → Transceiver Accry.
3 Select one of the following:
Visor Mic Rear Accry — Contains a list of preconfigured visor microphones.
Handset Rear Accry — Contains a list of preconfigured handsets.
Fist Mic Rear Accry — Contains a list of preconfigured fist microphones.
Ext Spkr Rear Accry — Contains a list of preconfigured external speakers.
All accessories from the above lists must be connected to the connector at the rear of the transceiver
you control earpiece volume.
ROTARY KNOB
you control speaker volume.
ROTARY KNOB
key.
MENU
key.
MENU
Main Menu | 89
| |
Send Feedback

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis