Terminal Permanent Disable; During The Call; Writing Text; Selecting Text Entry Modes - Motorola MTM800 FuG Bedienungsanleitung

Terminal Permanent Disable

Your radio is provided with a feature that allows your service provider to disable it permanently in case it is stolen or
lost. When your radio is disabled permanently, it becomes inoperable. After a Permanent Disable your service
provider cannot enable your radio. It is recommended to Permanent Disable your radio only when you do not expect
to recover it. If it is recovered then a Permanent Disable radio can be reactivated by returning it to Motorola.
Note: This is a selling feature.

During the Call

During the call, label of the right S
Table 11: During the Call
Soft Key Label
Spkr
Erpce

Writing Text

Every time that you see text entry screen, refer to this section.

Selecting Text Entry Modes

Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press M → Entry Mode.
ENU
2 Select one of the following:
• Primary — for entering alphanumeric characters.
• Numeric — for entering numbers only.
• Symbol — for entering symbols only.
• Secondary — for entering alphanumeric characters (this mode is optional and you have to add it to the list). It
is convenient when you use one language, and sometimes wish to switch to another one.
Note: In the text entry screen, you can also press # key repeatedly to toggle through the entry modes.

Selecting Text Entry Methods and Languages

Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press M → Entry Setup.
ENU
2 Select one of the following:
key indicates the next possible change. Accessory default setup is:
OFT
Audio Setting
Audio goes to the main speaker (Speaker HIGH is displayed)
Audio goes to the earpiece (Speaker LOW is displayed)
Getting Started | 35
| | Send Feedback