Viewing Predefined Templates; Sending Predefined Templates; Status Messages; Viewing A Status Message Number - Motorola MTM800 FuG Bedienungsanleitung

Viewing Predefined Templates

Procedure:
1 From the home screen, press the
2 Select Messages → Predefined.
3 Highlight the required template and press M
4 Select View.

Sending Predefined Templates

Procedure:
1 From the home screen, press the
2 Select Messages → Predefined.
3 Highlight the required template and press Send, the PTT button, or the S
Note: You can edit the predefined template before you send it. Press the M
screen opens with the template text. You are only allowed to replace the existing text.

Status Messages

The radio allows you to send two types of status messages: statuses and targeted statuses. Your service provider
determines which type is enabled on the radio.
Statuses can be sent either to a selected talkgroup or to a private number programmed by your service provider.
Targeted statuses can be sent to any talkgroup defined for the radio or to any private number (from the contact list or
entered manually).

Viewing a Status Message Number

Procedure:
1 From the home screen, press the
2 Select Messages → Send Status.
3 Press the M key and select View.
ENU

Sending Status Messages

This procedure allows you to send status messages to either a selected talkgroup or a programmed private number.
Only one option can be enabled at a time.
Prerequisites:
• If sending statuses to talkgroups is enabled: switch to the talkgroup to which you want to send a status message.
• If sending statuses to private numbers is enabled: no action is needed, the private number is set up by your service
provider
Procedure:
1 From the home screen, press the
2 Select Messages → Send Status.
3 Do one of the following:
• Highlight the required status message and press Select, the PTT button, or the S
• If the status list is empty, enter a 5 digit status message number and press Send.
key.
MENU
key.
ENU
key.
MENU
key.
MENU
key.
MENU
Main Menu | 73
key.
END
key and select Edit. Edit
ENU
key.
END
| | Send Feedback