Winac Master Parameter Für Mec31 Und Microbox-Pc (Nanobox-Pc) - Siemens SIPLUS RIC IEC on S7 Handbuch

4.3.1.3. WinAC Master Parameter für mEC31 und microbox-PC (nanobox-PC)
ACHTUNG!
Änderung der Windows Firewall Einstellungen notwendig!
Die Standard Einstellungen der Windows Firewall sperren alle eingehenden TCP Ver-
bindungen. Daher müssen die L1_TCP_Port_Number_C1 (Default 2404) und
L1_TCP_Port_Number_C2 (Default 2405) zunächst freigeschaltet werden.
Die Freischaltung erfolgt unter: <Systemsteuerung / Windows Sicherheitscenter / Windows Firewall
/Ausnahmen / Port hinzufügen>.
Geben Sie hier einen Namen (z.B. IEC) und die Port Nummer (2404 bzw. 2405) ein und schließen Sie die
Eingabe mit OK ab. Der Port wird unter „Ausnahmen" in der Firewall eingetragen und kann jetzt verwen-
det werden.
FB100 VAR_INPUT
Registration_Code
Line_ID
L1_Active_Connect_C1
L1_Acceppt_All_IP_Adr_C1
L1_IF_Slot_or_Para_ID_C1
L1_IP_Address_HH_C1
L1_IP_Address_HL_C1
L1_IP_Address_LH_C1
L1_IP_Address_LL_C1
L1_TCP_Port_Number_C1
L1_Active_Connect_C2
... _C2
L1_TCP_Port_Number_C2
L2_T104_T0
L2_T104_T1
L2_T104_T2
L2_T104_T3
L2_T104_k
L2_T014_w
L2_Error_DelayTime
SIPLUS RIC IEC on S7 V1.5
Funktionsbeschreibung
Typ Default
IN DWORD DW#16#0
IN INT 1
IN BOOL FALSE
IN BOOL TRUE
IN BYTE B#16#1
IN INT 0
IN INT 0
IN INT 0
IN INT 0
IN INT 2404
IN BOOL FALSE
IN
IN INT 2405
IN Time T#30S
IN Time T#15S
IN Time T#10S
IN Time T#20S
IN INT 12
IN INT 8
IN TIME T#10S
Seite 53 von 235
Baustein-Kommentar / Kurzbeschreibung
!!! IMPORTANT !!! See product information
for differentiation of more than one line;1-x(see manu-
al); Default: 1;
0 (default): we are passive (listen); 1: we (active) try to
establish the con...
0:Only one defined IP-Addr. ... 1 (Default): Each IP-
Address will be accepted
IF_Slot (1-4) of PLC Ethernet Contr. or Para_ID for ext
IP Drv (>=80); Def: 1
xxx-Part of IP-Address xxx.0.0.0 ; only needed if 'ac-
cept all' = false
xxx-Part of IP-Address 0.xxx.0.0 ; only needed if 'ac-
cept all' = false
xxx-Part of IP-Address 0.0.xxx.0 ; only needed if 'ac-
cept all' = false
xxx-Part of IP-Address 0.0.0.xxx ; only needed if 'ac-
cept all' = false
Connections will be accepted or established with this
port (Def:2404)
0 (default): we are passive (listen); 1: we (active) try to
establish the con...
Parameter für 2te TCP-Verbindung (wie _C1)
Connections will be accepted or established with this
port (Def:2405)
1-255 sec/Def:30/Time-out of connection establish-
ment
1-255 sec/Def:15/Time-out of send or test APDUs
1-255 sec/Def:10/Time-out for acknowledges in case
of no data messages t2<t1
1s-48h/Def:20s/Time-out for sending test frames in
case of a long idle state
>1/Def:12/Maximum difference
number to send state variable
>1/Def:8/Latest acknowledge after receiving w I-
format APDUs
Def: 10 sec: after this time L2_Error_Link will be set, if
no con. is active
I IA CE
receive sequence
©SIEMENS AG 2013