Steca coolcept Bedienungsanleitung Seite 94

GB
Power limiting
Fixed voltage
ATTENTION!
Before setting a fixed input voltage, make sure that the generator is suitable for this. Otherwise,
this may result in yield losses or damage to the system.
Delete country setting
Factory setting
94
The inverter output power can be manually limited to a minimum of
500 W. When the power is manually limited, the
shown in the status display and the
default' measurement is displayed.
The device can regulate the input voltage to a manually adjustable
value. This switches off the automatic setting of the MPP (MPP
tracking). The input voltage can be adjusted over a range between
the maximum and minimum input voltage.
Example of application: fuel cell
After the country setting has been deleted the device restarts anew
and displays the guided initial commissioning menu.
Resetting the device to the factory setting deletes the following
data:
Yield data
n
Event messages
n
Date and time
n
Country setting
n
Display language
n
Network settings
n
After the factory setting has been deleted, the device starts anew
and displays the guided initial commissioning menu.
Derating symbol is
'Derating' / 'Cause: User
747.431 | Z08 | 2014-01-31