Steca coolcept Bedienungsanleitung Seite 137

Maximum input power at maximum
active output power
Rated input power (cos φ = 1)
Recommended maximum PV output
Derating / power limiting
AC output side (grid connection)
Output voltage
Rated output voltage
Maximum output current
Rated output current
Maximum active power (cos φ = 1)
Maximum active power
(cos φ = 0.95)
Maximum apparent power
(cos φ = 0.95)
Rated output
Rated frequency
Grid type
Grid frequency
Power losses in nighttime operation
Feeding phases
Distortion factor (cos φ = 1)
Power factor cos φ
Characterisation of the operating behaviour
747.431 | Z08 | 2014-01-31
StecaGrid 3000 StecaGrid 3600/x
3060 W
3060 W 3690 W (Portugal:
3800 Wp
occurs automatically when:
input power > max. recommended PV power
n
cooling is inadequate
n
input current too high
n
grid current too high
n
internal or external derating
n
grid frequency too high (according to country setting)
n
limiting signal received via an external interface
n
output power is limited (set at the inverter)
n
185 V ... 276 V (depending on the country settings)
16 A
13 A
3000 W 3600 W (Belgium:
3000 W
3130 VA
3000 W 3600 W (Portugal:
L / N / PE (protective earth)
45 Hz ... 65 Hz (depending on the country settings)
0.95 capacitive ... 0.95 inductive
StecaGrid 4200/x
3690 W
4310 W (Portugal:
3450 W)
4500 Wp
230 V
15.6 A
4200 W (Belgium:
3330 W)
3530 W
3680 VA
4200 W (Portugal:
3450 W)
50 Hz and 60 Hz
< 0.7 W
single-phase
< 2 %
GB
4310 W
3680 W)
5200 Wp
18.5 A
18.3 A
3330 W)
3990 W
4200 VA
3680 W)
137