Steca coolcept Bedienungsanleitung Seite 111

Country selection
Reactive power characteristic curve
Number of nodes
n
Node
747.431 | Z08 | 2014-01-31
———————————————————————————
NOTICE
The country can only be set once!
———————————————————————————
1. Press rs to select a country.
2. Press SET.
3. Press ESC; the dialogue shown at the left is displayed.
4. Press ESC to select a different country by performing step 1
and step 2, or
Press SET for a longer period of time (> 1 s) to confirm the
currently selected country. The check list is shown.
1. Press rs to select the type of reactive power characteristic
curve corresponding to the local regulations.
2. Press SET. The reactive power characteristic curve type is
adopted.
3. Press ESC. The check list is shown.
1. Press SET. The value flashes.
2. Press rs to change the number of nodes.
3. Press SET. The value is adopted.
4. Press ESC. The check list is shown.
1. Press rs to select a parameter for the node.
———————————————————————————
Notice
P % cannot be changed at the first and last nodes (000 %,
100 %).
———————————————————————————
2. Press SET. The parameter value flashes.
GB
111