Steca coolcept Bedienungsanleitung Seite 89

Status display
The status display shows the following values:
1
3 4 5
9
Numeric yield (day, month, year)
Daily, monthly and annual yields can be displayed numerically in a list.
747.431 | Z08 | 2014-01-31
①
Measurement name
②
Measurement with units
③
Date
2 2
④
Symbol
on this is provided in Section
F
⑤
Animated
6 7 8
indicates data traffic on the RS485 bus.
⑥
Symbol
⑦
Symbol
⑧
Time
⑨
IP address of the device when a network connection has
been established, display alternates with ③ – ⑦
The following applies to the status display:
The measurements shown in the status display are defined
n
under Settings ▶ Meas. values. Some measurements are
always displayed (default setting).
Current values are not displayed at night (solar irradiation too
n
low; example in Fig. left).
The CO2 saving shown in the status display are calculated
n
using the savings factor
① Yield period (day/month/year)
② Individual yields with period and value (1 per row)
The yield periods contain the following numbers of individual
entries:
Day yield: Last 31 days
Monthly yield: Last 13 months
Annual yield: Last 30 years
A yield value of 0 is shown when the inverter was not yet
1)
installed at that time.
Non-confirmed event messages ; more information
Connect symbol with 2‑digit inverter address;
Derating
Fixed voltage mode activated
508 g/kWh .
1)
1)
1)
Ä 7, p. 128 .
GB
89