Operating Buttons; Display - Steca coolcept Bedienungsanleitung

GB
3.2

Operating buttons

The operating buttons (④ in
Button Action
'ESC'
press briefly
press longer
(≥ 1 second)
press briefly
r
press briefly
s
'SET'
press briefly
press longer
(≥ 1 second)
3.3

Display

3.3.1 General information
For information shown in the display (② in
Symbol : The inverter is processing large amounts of data and is not able to process any user
n
input at this time. The resulting waiting time is indicated by the animated sun symbol.
Errors are indicated by a red flashing backlighting. An event message is also displayed at the
n
same time.
Note
The display reacts slower at very low temperatures. This is especially applicable to coolcept-x
devices that are used outdoors.
3.3.2 Information
The information shown on the display is described below using illustrative examples.
88
Ä 3.1, p. 86 ) have the following functions:
General
jumps up by one menu level
jumps to status display
moves the selection bar or the display content upwards
n
when performing numerical settings, moves the selection 1 posi-
n
tion to the left
increases the setting value by 1 step
n
moves the selection bar or the display content downwards
n
when performing numerical settings, moves the selection 1 posi-
n
tion to the right
decreases the setting value by 1 step
n
jumps down by one menu level
a selected numerical value starts flashing and can be changed
n
adopts a change
n
changes the state of a control element (check box/radio button)
n
answers a query dialog with
Ä 3.1, p. 86 ) the following generally applies:
Function
Guided configuration process
navigates 1 step back
discards any changes
jumps to the start of the guided
configuration process
—
Yes .
navigates 1 step forward
747.431 | Z08 | 2014-01-31