Internet Portal - Steca coolcept Bedienungsanleitung

GB
Calling up the service menu and editing the values
ATTENTION!
Risk of yield losses and contravention of regulations and standards. Inverter and grid parameters
can be changed in the service menu. The service menu must therefore only be used by technical
professionals who know the applicable regulations and standards.
5.4

Internet portal

Notice
The Internet portal only supports inverters in the coolcept product line.
–
The following illustrations show examples in English.
–
118
4. Press s. The next value is selected.
5. Repeat steps 1 to 4 for the remaining values.
6. Press ESC. The next higher menu level is displayed.
1. Select the Service menu item.
2. Press SET. The fig. shown at the left appears.
3. Press rs simultaneously for 3 seconds. The service menu is
displayed (Fig. left).
4. Press rs to select a menu item.
5. Press SET to edit the menu item. The following applies:
Enter the password if required (Fig. left); see
n
Ä 3.3.4, S. 93
If necessary, press rs within a menu item to display and
n
edit other settings (e.g. Voltage limits).
The menu items are described in
n
Ä 3.3.4, p. 93 .
747.431 | Z08 | 2014-01-31