Steca coolcept Bedienungsanleitung Seite 131

Event message Description
u Contact your installer if this message occurs frequently.
Intern.
info
Intern.
u Contact your installer if this message occurs frequently.
warning
Intern.
u Contact your installer if this message occurs frequently.
error
An error occurred during the self test and the self test was cancelled.
Self test
failed
u Contact your installer when
n
n
An inconsistency exists between the selected country settings and those
Faulty coun-
stored in memory.
try
settings
u Contact your installer.
The maximum permissible boost converter temperature has been
BCONV over-
exceeded. The inverter feeds no power into the grid until the maximum
temperature
permissible temperature is no longer exceeded.
1. Check that the installation conditions are satisfied.
2. Contact your installer if this message occurs frequently.
The boost converter is defective, the inverter is not feeding into the grid
Boost con-
or is feeding at reduced power.
verter de-
fective
u Contact your installer.
u Contact your installer.
Boost con-
verter not
detected
747.431 | Z08 | 2014-01-31
the self test is cancelled due to an error several times at different
times of the day and
it is certain the the grid voltage and frequency were within the limit
values defined by the country setting; see
Ä 9.3, p. 141 .
GB
Type
131